Sony has finally managed to fix the issue on the Sony A1 2.0 firmware! And there is also the new A9III major firmware update:
- Sony A1 firmware update 2.01 (download it here).
- Sony A9III firmware update 2.00 (download it here).
Benefits and Improvements
- Shooting & playback functions:
- Allows you to turn the camera on/off remotely from a computer using a wired connection to the internet (LAN)
Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function. - Adds a function that automatically creates still images with Shot Marks from movie frames after recordings
Note: You can add a Shot Mark while shooting or playing a movie and use it as a mark for selecting, transferring, or editing the movie. - Allows the use of shutter speeds up to a maximum of 1/80000 seconds in all drive modes and the NR Shooting setting (long-exposure noise reduction) when the aperture value is F1.8 or higher
- Adds support for the Relay Playback function
- Adds the Sync Release function that releases the shutters of multiple sub-cameras in conjunction with the main camera’s shutter timing
Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function. - Adds a function that displays the focus frame on the Remote Camera Tool app screen when the monitor and viewfinder are turned off
Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function. - The maximum number of images that can be recorded in one folder has been increased to 9,999
- Enables display of the Wi-Fi signal strength
- Adds support for C2PA format (The license availability date is undecided)
(C2PA = Coalition for Content Provenance and Authenticity) - Adds support for Custom Grid Line
Note: Custom Grid Line is available as a paid license. Availability depends on the country and region.
- Allows you to turn the camera on/off remotely from a computer using a wired connection to the internet (LAN)
- FTP transfer & network functions:
- Allows you to upload camera images directly to the Creators’ Cloud app
Note: Creators’ App Ver. 2.3.1 or later is necessary. Settings must be made in the Creators’ App in advance. For more information, please visit the Creators’ App support website. Service may not be available in some countries or regions. Please refer to this support page. - You can now automatically schedule FTP transfer of protected movies and still images
- Movies/still images transferred via FTP transfer can now be automatically protected
- Adds a function to prioritize specific images via FTP transfer
- Adds support for SFTP
(SFTP = Secure File Transfer Protocol)
- Allows you to upload camera images directly to the Creators’ Cloud app
- Others:
- Fixes an issue where the camera would occasionally become unstable during continuous shooting
- Fixes an issue where the color of a JPEG image may change when cropped in the camera
- Fixes an issue where images may not be transferred properly during FTP transfer
- Fixes an issue where the folder name setting for still images may switch from the set value to the default value (MSDCF) when the battery is removed
- Fixes an issue where the camera may not be able to connect to the network
- Fixes an issue where the timecode wasn’t always retained after a power restart
- Improves the functionality and operational stability of the camera