Sony released a massive firmware update for the Sony FX3 and FX30

The Sony FX3 got a massive firmware update! Here are the info from Sony.com:

Benefits and Improvements

• Adds a home screen (BIG6) where you can easily review the shooting settings and equipment configurations when shooting movies
• Adds a Fixed/Variable mode that supports S&Q shooting settings by directly specifying the shooting frame rate without needing to set the S&Q mode
• Adds support for the Focus Magnifier and Auto Magnifier in MF settings while using the Bright Monitoring feature
• Adds 1.5x and 1.6x magnifications to the De-Squeeze Display
• With RAW video output via HDMI, external recording of Blackmagic RAW has become possible
  • We recommend checking with Blackmagic Design regarding the corresponding Blackmagic Design products.
• Allows the camera to automatically recognize the USB-LAN conversion adapter (sold separately) and connect to the network when powered on
• Allows the remaining capacity of both storage devices to be displayed during movie recording when using Simult. or Auto Switch Media (Relay Recording)
• Allows the optical density of pre-registered ND filters to be recorded in the metadata
• Allows the filtering of camera images for smartphone transfer and FTP transfer using Clip Flag
• Allows the direct upload of camera videos to Creators’ Cloud based on OK/NG/KEEP flags
  • Settings must be adjusted in the Creators’ App in advance. For more information, please visit the Creators’ App support website.
  • Ver. 3.1.0 or later of the Creators’ App is necessary.
  • This service may not be available in some countries or regions.
  • For more information, please visit the Creators’ Cloud support website.
• Supports the following Monitor & Control app functions:
  • Manual framing function
  • Attach Clip Flag

  Notes:

  • Ver. 2.4.0 or later of the Monitor & Control app is necessary.
  • The Monitor & Control app may not be available in some countries or regions.
• The Security (IPsec) functionality is no longer supported. Please enable and use Access Authen. as it provides more secure protection
• WPA and WEP functionalities are no longer supported. You will no longer be able to select WPA or WEP when connecting to Wi-Fi. Please use the more secure WPA2 or WPA3 moving forward
• Improves the operational stability of the camera

Note: Please refer to the Help Guide for details on all updated functions.

–

Also the Sony FX30 got firmware update! Here are the info from Sony.com: